Mazda CX‌-90 Forum banner

CX-90 PHEV GT Alberta Canada

9.5K views 31 replies 10 participants last post by  muchomucho  
#1 ·
Hey everyone!
This is my CX-90, I took delivery of it mid-July. It already has 6000km and I have not had any issues! I did full front PPF all the way to the roof and done ceramic coating in and out myself.
I’m waiting on the Mazda premium floor mats to arrive and I have my winter set of wheels ready. I’m also looking at doing rustproofing with Sublime surfacing here in Edmonton and adding the mud guards before winter.

Image

Image

Image

Image

Image

Image

Image

I went with 265/55R19 on Toyo Observe GS-6. Took a bit of a risk with the bronze wheel but I think it will look great for winter!
 
Discussion starter · #7 ·
I used multiple of their product.
Cquartz Sic for the 1st coat on the paint
CarPro Skin for the PPF
CarPro GLISS as a top coat
CarPro DLUX on the wheels and plastic trims
And also CarPro Fabric coating for the carpets
 
Discussion starter · #11 ·
How much were these from Mazda?

I bought them from these guy’s. 200$ for the front.
 
Discussion starter · #14 ·
Nice floor mats, thanks for the pictures.
Should work great with winter on us/you.

Winter wheel and tire setup looks great and you are ready. I'm in Hawaii and it is 81 degrees and sunny outside, tonight low of 72 (chilly). Not. ;) I lived in Chicago for 5 winters. o_O
Thank you! We have been down to 14f at night already here in Edmonton 🥶
 
Discussion starter · #18 ·
How has the cquartz products worked out for you on that handsome CX90? I was considering purchasing some and just looking for some further feedback.
So far so good. It does help when you go for a quick wash and when doing a hand wash the car just look stunning. We will see how it handles salt and sand this winter.
I really like how it keeps the black plastics nice and black.
For the leather, I don’t have kids and my dogs don’t go in the car so it only gets a light use so it’s hard to give you a good feedback. On the driver side though I still had some Jean die transfer.
 
Discussion starter · #19 ·
Hello!
I’m reaching 20 000km after 8 month and I have completed the first maintenance at 16 000km.
I want it to give a bit of an update on all the repair and recall that have been done so far …
At 9000km in October "hybrid malfunction" error message, dealer did updates and never had it come back again. Recall 6123H for pedestrian alert system warning completed.
At 11 500km in November Recall 6323J for loss of power and 6223J for 360 camera completed.
At 16 000km in January1st maintenance and repair for noise in the front suspension which they simply grease the parts. Haven’t heard it since
I also brought up the fact that the driver door makes a knocking noise and the adaptive cruise control slows down when passing trucks.
At 17 500km end of January Mazda release an update to fix the cruise control issue. I have not have any slowing down while passing since then.
Reaching 20 000km now, parts for recall 6524A for sudden increase in steering effort have arrived and also the door noise was created by the chrome trim at the top hitting the back trim. Parts are in for both side. I have to get the CX-90 in for those repair and swap back to the summer wheels.
Definitely a bit inconvenient to have to visit the dealer so many times but they always give me a loaner and Mazda seems to be on top of the issues. Let’s hope there is no bigger failure as I’m still loving the CX-90!
 
Discussion starter · #22 ·
I have almost the same spec as yours, so I appreciate the info and pictures. I was hesitating on color and your pix helped me choose Blue and I am very happy so far. (Blue on white PHEV GT with mud guards. I went with the Amazon mats, though) I just got mine so all the recalls and fixes we're done at the factory.

I also didn't feel like hauling around mounted tires, so I just bought a set of winters to mount on the OE mags.
I’m glad it helped you make a decision! I’m also still very happy with the color choice.
yes, hopefully after almost a year of production they have fixed most of the bugs.
Those 21" takes up a lot of space and are very heavy to move around!
 
Discussion starter · #25 ·
Hey, I have a CX90-GT and thinking of applying ceramic coating. Is there any product you can recommend, and a video or description on application method? Thank you.
There is lots of video’s on YouTube on how to do it but I used all the products from CarPro and it’s not that difficult to apply but it does take time and the CX-90 is a big vehicle to cover!
 
Discussion starter · #29 ·
Some updates on the car.
Went in to the dealer again couple weeks ago for some various issues:
Radio would stop playing FM, Sirius XM or even Spotify on Apple car play. They did an update and it’s been good so far.
Jerky transmission, nothing they can do about it for now… update to come soon.
Also blind spot monitoring signalling a vehicle even when there is none. They did another update.
it has been getting some many software update for the past year, I really wish Mazda would let you do it at home on the wifi instead of having to visit the dealer and leave the car there each time for diagnostics.